STP Oil Filter Review
Filters are an important part of a car’s maintenance, and there are a lot of different types available on the market. In this article, we’ll be taking a look at STP oil filters and what makes them stand out from the competition. We’ll also discuss some of the pros and cons of using STP filters so that you can make an informed decision about what’s best for your vehicle.
STP Oil Filter Overview
STP Oil Filters are typically low-budget oil filters. They typically cost between $3-$5, which is very affordable for most budgets. STP Oil Filters use standard spin on connections, and come in plastic cases around the size of a 20 ounce drink bottle.
Typically, the filters will be made with an inner metal shell to protect the filter paper inside from damage caused by particulates in engine oil. The paper will also contain extra chemicals (such as PTFE) to act as anti-wear agents to further reduce wear on your engine.
As long as you’re using good quality motor oil (preferably one that is better than nothing), then these inexpensive filters will do fine in protecting your delicate engine components.
If you are using a synthetic or high quality oil, then STP Oil Filters will not offer any protection over your expensive motor oil. If you are on a budget, and can’t afford to get another more expensive filter for better engine protection, then the STP Oil Filter is one of the best options available that won’t break your bank account.
However, this does mean that if you’re looking for long term performance benefits from purchasing new filters, it would be wise to look elsewhere. These filters will do fine in protecting against most dirt particles in engine oil; however they do not contain anti-wear agents like other higher end filters do. This means they don’t provide much (if any) extra protection when compared to cheaper oil filters.
If you are on a budget, then the STP Oil Filter is an affordable option. It is also very accessible at most local auto-parts stores along with most gas stations. If you’re looking for long term performance benefits without spending too much money, it would be wise to look elsewhere.
Although this filter will do fine in protecting your engine against most particles, it does not contain any anti-wear agents like other filters. This means it won’t offer much (if any) extra protection when compared to cheaper oil filters.
STP Oil Filter Specifications
The STP oil filter is a spin-on oil filter manufactured by ACDelco, a division of General Motors. The company has been in business since 1899 and claims to produce the highest quality, uncompromising products for automotive applications.
There are many benefits of using STP oil filters compared to other brands which we will discuss below:
- The ant-drainback valve is built into the top of the filter and allows for immediate engine protection upon installation – this helps prevent dry starts and provides a better seal (which reduces leaks). This technology is used by all leading OE manufacturers. There’s no need for an external valve because it’s already built in!
- Installs quickly and easily, with only one bolt holding it in place. It can be installed at any angle – not like some of the competition.
- The STP website even claims that its oil filters are guaranteed to last the life of your engine.
The ant-drainback valve is something many people will want to know about – it allows for quick startup, so no risk of dry starts or reduced lubrication during cold winter months or garage storage periods. Many popular companies such as Mobil and K&N produce oil filters without this 14-karat gold valve, but it just goes to show that STP oil filters are built to last.
It has been personally tested on a variety of vehicles, including my personal 1999 Mitsubishi Montero Sport with the 2.4L engine and it worked perfectly. No more leaks or sludge issues- I’m confident that this filter will help keep my car running strong for a long time! The best part is they’re affordable enough that you can change them as frequently as needed – most mechanics recommend changing your oil every 3k miles!
STP Oil Filter Key Features:
- 99% filtration efficiency
- Spin-on oil filter
- Fits most vehicles with 14mm hex size (half inch)
- Universal design allows use on cars, trucks, vans and SUVs
- Patented rubber sealing beads provide strong adhesion between canister and base plate for less leakage
- Quality materials are corrosion resistant that maximize durability
- Dual layer cellulose filter media offer an alternate path for impurities entering your vehicle’s oil system
- Reinforced outer shell and impact pistons help absorb engine vibrations and provide maximum durability and longevity
- Helps maintain proper oil pressure and reduces harmful sludge build-up for clean running engines
✅Purchase link: Buy STP Oil Filter at Amazon
What Car Models STP Oil Filter Is Compliable With?
The STP oil filter is a new product that has just recently entered into the market. It was made for all types of vehicles, including both gasoline and diesel engines. In most cases, the STP oil filter is compliant with a wide range of cars and trucks. However, before purchasing the product to ensure that you are providing for your car’s maintenance needs, be sure to check your owner’s manual for exact specifications on compatibility.
Benefits of using STP Oil Filter
For an oil filter to be effective it must contain a number of high quality materials that will effectively remove dirt, grime and other types of debris from the oil as it passes through the filter. This material is called a filter media. Filters can have anywhere from two to four different layers of this media depending on the specific type of design. They usually include an anti-drain back valve which prevents contaminants in the oil from entering into the engine at all times, even when the car is turned off or if there are any interruptions in power sources.
The STP Oil Filter Review also states that each layer is made up of sub layers. These sub layers include micro screens; these screens act like sand paper for particles within the oil run off, the media itself, which is made up of multiple layers, ceramics and finally a lubricant. All of these are designed to work together in order to produce the best possible oil filter for your car.
STP Oil Filters are easy to use when changing out the old filter with the new one because they are made with an anti-drain back valve making it easy to change filters without having to wait long periods of time for them to drain properly. These STP Oil Filters also contain seven pleats instead of six like many other filters on the market so that more surface area is covered within tighter space constraints. The material used in their construction has been tested over time and found effective at removing contaminants from engine oil while increasing engine performance.
How Often Should You Change STP Oil Filter
One of the most common causes for a car to break down is a broken oil filter. Instead of buying every single brand available, read about what consumers have said about their experiences with STP Oil Filters. If you are skeptical, use it as a starting point and compare to other brands. Once you get an idea of how often this oil filter should be changed, stay consistent with your auto maintenance schedule and engine life will remain solid.
For whatever reason this has happened, if the cause of the break down was because of a broken oil filter then it may be best to just buy a new one from a different manufacturer. Regardless, any consumer experience that talks about how many miles or months they got of their STP Oil Filter should be interesting. Consumers say that this oil filter usually lasts up to 3,000 miles.
How to Change Oil Filter Yourself
Changing your own oil is something safe and easy to do. It’s also handy if you’re on a budget and don’t want pay an arm and a leg just for an oil change. If you follow the steps below, you’ll be able to get through changing your oil in no time! Just make sure you have the right tools for the job.
The first thing that you are going to want to do is to park your car on a level surface, turn off the engine, and then open up your hood. Make sure you use an oil filter wrench when removing an oil filter canister. It’s important because this kind of wrench ensures that the filter is properly tightened and that no oil seeps out.
After that, you need to locate your car’s oil drain plug. It should be directly underneath the vehicle (near the center of it), on its underside. Use a pair of pliers to loosen it until all of the oil has drained from your engine. Then use another rag to wipe off the drain plug and then reinstall it.
Now that you’ve done all of that, it’s time to remove the old oil filter canister. This is easy with an oil filter wrench. If you don’t have one, you will need a few sets of pliers to make do for now. You should also try to find out where the used oil goes after being drained from your car. Just in case you are not sure on how to do this, there are usually some guidelines printed on the underside of your engine lid or near where you took down the used oil container cap (typically under or near your vehicle).
Once all of that is finished, clean out any leftover sediment from inside the new canister before putting in the new one. After this, pour the recommended amount of oil into your engine and then replace its cap before starting your vehicle back up again.
That’s all there is to it! If you follow these steps carefully, you’ll be able to complete an oil change with no problem. However, if you find that changing the oil in your car is too difficult for you to do on your own or if you would rather have someone else take care of it for you (such as a mechanic), then go ahead and see what kinds of deals and offers they might have available for you today.
