2018 Ford f150 5.0 Oil Change
If you’re like most people, you probably don’t think about your car’s oil until it’s time for a change. And if you drive a 2018 Ford F150 5.0, the process is pretty simple. In this article, we’ll show you how to do it in just a few easy steps. So, whether you’re a seasoned pro or a total beginner, read on for all the info you need to know!
2018 Ford f150 Oil Type
The 2018 Ford F150 is a great truck with many features to offer drivers. One of these features is the oil type that the truck uses. It is important for drivers to know what type of oil their car needs so they can be sure to get the best performance and fuel economy from their vehicle. It’s always the best ideat to check your owner’s manual first. But we will go over the different types of oil that are available for the 2018 Ford F150 and what each one does for the truck. We will also provide some tips on how to choose the right oil for your vehicle.
The 3.5L V6 calls for SAE 5W-30, when the 5.0L V8 engine uses SAE 5W-20 at all temperatures.
2018 and newer 5.0L V8 will need about 8.8 quarts of oil with the new filter.
SPECIFICATION OF OIL
Ford requires using Mastercraft Synthetic 5w-20. This is the best oil for your Ford F-150 based on engine life and performance.
HIGH MILEAGE OIL FOR 2018 Ford f150
For all 2018 Ford F150 5.0L engines, there is only one choice when it comes to motor oil and that is the best high mileage oil – Castrol GTX 5W-30 High Mileage Synthetic Blend Motor Oil.
2018 Ford f150 Oil Change Intervals
The 2018 Ford F-150 5.0L V8 is a full sized, light duty pickup truck that comes with a standard oil change interval of 7,500 miles. This truck engine is available as part of the XLT or Lariat trims and uses a conventional motor oil specification of SAE 5W-20.
So, you should use a standard synthetic oil change interval of 7,500 miles.
Best Oil for 2018 Ford f150
The Ford f150 is a popular truck that comes in multiple variants. There are many different oils on the market that can be used to lubricate this vehicle. This guide will help you find the best oil for your 2018 Ford f150. We will look at the different types of oil available and their benefits.
Oil (by manufacturer) – Ford manual recommends using MotorCraft 5W20 Premium Synthetic Blend Oil. The Ford F150 5.0 has a powerful engine with 8 quarts capacity for engine oil, but it is important to use the correct kind of fluid, especially if you want your car or truck running smoothly. API SM certified standard motor oils offer protection at higher temperatures so they are perfect in this situation. MotorCraft oil meets all the requirements.
Oil (our choice) – We recommend also Castrol Edge 5W-30 Advanced Full Synthetic Motor Oil for Ford F150 5.0 because it is safe to use and approved by owners. It can provide better gas mileage, engine protection and performance for your engine.
Oil filter (by manufecturer) – If you are looking for a perfect oil filter for your 2018 Ford f150 5.0 then check out this Motorcraft FL-500S Original Version Oil Filter.
How to Change Oil by Yourself – Step by Step
Changing your oil is a necessary task to keep your car running smoothly. Here we will show you how to change your oil for a 2018 Ford f150, step by step. This process is simple and only requires a few basic tools that most people have lying around the house. If you follow these instructions, you can save yourself some money and do it yourself! Let’s get started.
Start by parking your 2018 Ford f150 5.0 on a level surface and ensuring the engine is cold. First, open the hood and locate the oil cap on the right-hand side of your engine block (if you are sitting in the driver seat, it’s on your left).
Place a catch pan underneath the spot where the oil cap was once seated. Remove this cap to access your drain plug; turn counterclockwise to loosen. Let the oil drain into the catch pan for several minutes.
Place the drain plug back in once all of the oil has drained out, and tighten it with your wrench; turn clockwise until you feel/hear a click (this tells you it is tightened securely).
Next, place your new oil filter on top of your engine bay and torque it on clockwise with your wrench; turn until you hear a click. Open the hood and remove the oil cap to replace over the drain plug, tighten clockwise, making sure it is securely in place.
Then, pour half of the new oil into the engine block through this hole, followed by pouring the other half into the oil cap located on top of your engine.
Start up your 2018 Ford f150 5.0 and allow it to idle for about ten seconds; then, turn it off again and allow the oil to run through for another few seconds before shutting it back off. This process will ensure that all of the new oil has made its way through all of your oil lines and into your engine. Allow the car to run for another ten seconds, turn it off again, and top up as needed with some additional oil until you have reached the “full” line on your dipstick. Recheck that the oil cap is on tightly by turning it clockwise with a wrench or your fingers, and that the drain plug is securely in place.