2010 Toyota Corolla Oil Change
If you are the owner of a 2010 Toyota Corolla, then it is important that you perform regular oil changes in order to keep your vehicle running smoothly. In this blog post, we will provide you with all the information you need to know in order to complete an oil change on your own. We will also outline some of the benefits of performing regular oil changes on your car.
2010 Toyota Corolla Oil Type
Are you looking to buy a 2010 Toyota Corolla? If so, you may be wondering what type of oil the car requires, you can find this info in your owner’s manual. Now we will discuss the recommended oil type for the 2010 Toyota Corolla. We will also provide some tips on how to change the oil in your car. Keep reading for more information!
VISCOSITY
Toyota recommends using SAE 0W-20 Toyota Genuine Motor Oil for the 2014 Corolla. This is a synthetic oil. Toyota also states that if 0W-20 is not available, SAE 5W-20 may be used until the next oil change when 0W-20 is available.
CAPACITY
The 2010 Toyota Corolla 1.8L oil capacity is 4.4 quarts (4.2 liters) and 4 quarts (3.8 liters) for the 2.4L engine.
SPECIFICATION OF OIL
Toyota Genuine Motor Oil Fuel Economy SAE 0W-20 meets the lubrication requirements of petrol and diesel engines, including turbocharged engines, the most up to date lean burn petrol engines and engines equipped with catalytic converters. Also Mobil 1 is a certified partner of Toyota, so note that there’s a full range of Mobil 1 motor oils are suitable for Toyota vehicles which meet many of Toyota’s viscosity and specification requirements.
HIGH MILEAGE OIL FOR 2014 Toyota Corolla
Mobil1 – High Mileage 0W-20 Full Synthetic Motor Oil is a very popular choice for many vehicles, and 2014 Toyota Corolla as well.
2010 Toyota Corolla Oil Change Intervals
The Corolla is a compact car manufactured by Toyota. First introduced in 1966, the Corolla has been produced in more than 40 countries and has sold over 40 million units worldwide.
Owners of 2010 model year Toyota Corollas can change their own oil and filter with standard oil and filter tools. The vehicle includes an oil life monitor system that notifies the driver when it is time to change the oil. The 2010 Corolla requires an oil change every 5,000-10,000 miles, depending on which oil type, conventional or synthetic is used (synthetic oil can be changed less often).
Best Oil for 2010 Toyota Corolla
The engine oil is the lifeblood of any car. It is responsible for lubricating all of the moving parts, and helps to keep everything running smoothly. So it’s important to choose the right kind of oil for your vehicle. If you have a 2010 Toyota Corolla, then check out next oil brands, it will provide good protection against wear and tear, while also helping to improve fuel economy. It’s the best option for your car, and will help keep it running in top condition.
Oil (by manufacturer) – Toyota recommends using Toyota Genuine Motor Oil SAE 0W-20. 2010 Toyota Corolla uses 5 quarts (liters) of 0w-20 weight motor oil which is a synthetic blend oil.
Oil (our choice) – Mobil 1 is a trusted brand that is also certified by Toyota. It is a safe motor oil to use for your 2010 Toyota Corolla. It can provide better gas mileage, engine protection and performance for your 2010 Toyota Corolla engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2010 Toyota Corolla then check out this TOYOTA Replaceable Element Oil Filter.
How to Change Oil by Yourself – Step by Step
So, if you owe a 2010 Toyota Corolla, you may be wondering how to go about changing the oil on your own. The good news is that it is a relatively simple process, and with these step-by-step instructions, you can do it in no time. Note that while this guide is specific to the 2010 Toyota Corolla, the basic steps should be similar for most cars. Happy motoring!
Step 1. Gather Your Supplies
Open up your garage door or go out to where your car is parked and make sure you have all the following supplies:
Parts needed: car jack (floor jack), torque wrench, 10mm socket, oil drain pan, fresh oil filter (with any luck this will be included in the change package)
Tools needed: ratchet and extension bar, 10mm deep well socket & driver, funnel.
Step 2. Loosen and Remove Oil Drain Plug
Using your 4-way ratchet and a 10mm deep well socket or driver turn it counter clockwise to loosen and then pull it out. Make sure to keep the plug perpendicular so that all of the oil drains out without getting any on your clothes/hands/car. Once you see no more signs of dripping stop turning. Now grab your oil drain pan and put it under the oil plug opening.
Step 3. Remove Oil Filter
In order to get down to the oil filter you have to remove a metal tube/guard that protects the lower regions. To do this, look for 3-4 nuts on each side of the tube and a corresponding bolt at each end. Using your 10mm socket/ratchet unscrew these bolts and nuts by turning them counterclockwise. If they won’t budge use your breaker bar or ratchet wrench with an extension bar for leverage. Once you’ve loosened them all, grab one end of the tube and gently wiggle back and forth until it comes off in your hand.
Once you’ve removed the tube/guard, go up top and use your 4-way to unscrew the oil filter. It should take a few turns before it loosens and after that, it’ll come out pretty easily. Once you’ve got it out place it onto an old newspaper or paper towel in order to catch any leftover oil that drains from the filter mount.
Step 4. Drain Old Oil
There will be a translucent/brownish colored oil (you may notice some dark spots in it as well), drain this into your oil drain pan. After all of the oil has drained put the plug back in by screwing it clockwise until snug, but not too tight so you strip anything. If you have a torque wrench, tighten until its at between – 36 lb-ft of torque and – 43 lb-ft of torque.
Step 5. Add New Oil
Now get your funnel out and put the new oil filter back in how you removed the old one (turning it counterclockwise while looking down at it). Once you’ve screwed the filter on hand tight, grab some paper towels or rags to clean up any spills on the engine part that may have dripped out while changing the oil. Unscrew divider between your oil drain pan and fresh oil container so that you can pour new oil into the engine through your funnel. If you’re not comfortable with pouring by sight alone, use a flashlight to aim down your funnel opening so you can see when the stream starts coming. When this happens stop pouring and screw the cap back on your fresh oil container/bottle.
Step 6. Fill up Engine
Unscrew divider between your fresh oil container and oil drain pan. Pour new oil into the engine through this opening until it reaches the ‘full’ line (this will be different for each vehicle, you can check your manual to find out the exact measurement).
Step 7. Replace Drain Plug and Filter
Screw the drain plug back into place using your 4-way and a 10mm socket or driver (counterclockwise, while looking down at it to make sure you don’t cross thread anything). Once the drain plug is in to where you see no more signs of dripping, stop turning and do the rest of your socket turns in short bursts. Make sure to wipe up any potential oil drips before you put your tools and oil bottles away so nothing gets stained or damaged.
Congratulations! You’ve just changed your own Oil in a 2010 Toyota Corolla.
